Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | R102 User Manual
46
3.7
Hardware
3.7.1 Ser2TCP
Serial to TCP provides an easy way to convert local serial data into Ethernet data and two-
way communication with remote devices. Each conversion rule can be independently
configured as server-side or client-side mode. You can also add, edit or delete a conversion
rule on this page.
When clicking
Edit
behind a device, you’ll be able to make advanced settings. Under the
server mode, three protocols are available which are differentiated as below:
1)
Raw: enables the port and transfers all data as-is between the port and the long.
2)
Rawlp: enables the port and transfers all input data to a gateway that is open
without any Termios settings, allowing to use /dev/lpx devices and printers
connected.
3)
Telnet: enables the port and runs the telnet protocol on the port to set up telnet
parameters (less used).
3.8
Services
– Dynamic DNS
Dynamic DNS is a technology in domain name system (DNS) that automatically updates the
