Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
79
After configuration of the protocol channel, the protocol will be displayed on the page. You
can make subsequent changes to the channel like deletion or edition.
Description of the numbered areas
1.
Delete the channel or access the detail page of the channel and make changes
accordingly, including disabling the channel
2.
The channel is set to refresh automatically every 5 seconds, and you can assign an
optional value between 1 and 99 for auto refreshing
3.
Add a device for data collection
4.2.2 Device Configuration
To add a target PLC to the web interface, first connect the PLC to the gateway, then input the
device information in the pop-up window upon a click on the
Add
button as shown in the
screenshot above.
The device information to be input varies with the protocol you added for communication.
Take Siemens S7-200 Smart PLC for example, if you apply Ethernet communication, you have
to make sure
S7 protocol
is included in the .ipk file and you have created a channel for the
protocol. Then you can proceed with the PLC setup under the channel.
