Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
34
2.4
Network Connectivity
When the Gateway has both wired and wireless connections, the status page will display
like below.
2.4.1 Ethernet Network Connectivity
The default WAN settings allow your gateway to join an Ethernet network without any
additional configuration.
The Gateway uses a DHCP protocol to assign IP addresses, subnet masks, default gateway
addresses, and Domain Name System (DNS) server addresses by default. If you switch
DHCP to static protocol, you’ll need to set all of these IP addresses manually.
2.4.2 Wi-Fi Connectivity
The Gateway is configurable to both client mode and AP mode.
For C335, however, Wi-Fi and 4G LTE are designed to be alternative. Therefore, if you
choose Wi-Fi for wireless connection, 4G LTE will not be available, and vice versa.
for advanced settings of the wireless network.
2.4.3 Mobile Network Connectivity
For customers using a SIM card for network connectivity of the Gateway, the 4G LTE
function under
Network
tab allows you to make changes to the cellular network settings.
Before you configure for 4G LTE network, be sure to activate and install the SIM card
properly.
for advanced settings of the mobile network.
2.5
Custom Settings
As Vantron provides an SDK, users can upload their own scripts or programs or IPK
packages to the Gateway and set them to run at startup or to support certain protocols.
