Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
39
3.3
Quick Start
3.3.1 Network Guide
This page provides a quick guide to such functions as rapid networking of the Gateway and
a display of the network port status and interface logic diagram. Refer to
for advanced settings.
Application of the network setup wizard will clear customer-defined configuration
parameters.
Since C335L has only one Ethernet port that works in LAN area, WAN port settings are
not applicable to this model unless you configure it as a WAN port, in which case, WiFi
AP is bounded with the network bridge (br-lan) and ETH0 is to connect the higher-
level network for PPPOE/DHCP/Static mode settings.
For C335, Wi-Fi and 4G LTE are designed to be alternative. Therefore, if you choose 4G
LTE for wireless connection, WiFi AP/client will not be applicable here for the network
bridge.
for the definition of the ports.
3.3.2 WAN setting – DHCP
DHCP
:
ETH0
and
WiFi
are bounded with the network bridge (br-lan).
ETH1
is designed as
the WAN port to connect the higher-level network. 4G LTE port does not work under this
mode.
DHCP
setup procedures:
Step 1: Select
DHCP
for
WAN Protocol
;
Step 2: Click to switch the protocol to
DHCP
;
Step 3: Click
Save & Apply
.
Switch of WAN protocol will reset the network port topology and network parameters
to default values.
