NST-225MX-S3 2.5” Dual SATA 6 Gb/s to USB 3.0 HDD/SSD RAID
8
7.
This Step will set the RAID mode. Connect the power cable to the enclosure and
the ac adapter to your power outlet. While pressing the reset button, turn ON the
power switch and continue to hold the reset button for another 10-15 seconds
while the drive spin up and set the mode change. After 15 seconds later, you can
release the reset button and the mode change is done. The Green HDD LED will
continue to flash and the Red Power LED will be ON. You can now turn off the unit
and continue with the next step.
8.
Slide the cover back on to the Tray and secure using the 4 Screws.
9.
You can now start using your enclosure. If you need to initialize, partition and
format the drive, please refer to Chapter on
Hard Drive Formatting Guide
.
