Vantage Hearth HD 8000S, Руководство пользователя

Страница: 9 / 60

C
hapter 2>> Controls and Functions
9
Engllish
Additional function
1. Learning Method
• If there is no further action within 30 seconds in LEARN MODE, the remote control turns to
normal operation mode switching LED off.
• TV Power key doesn’t have Default key data.
The Learning Method
• Only the key of “TV Power”has Learning function.
• Toggle Learning (Continuous 2 codes should be learned in TV Power key)
• 1st Learned data is produced upon 1st press and then 2nd Learned data will be produced
upon next pressing on the TV Power key.

If you press [TV Power + OK] KEYs at the same time for 1.5 seconds, the remote goes into
leaning mode. => Then LED ON will be “ON’ for 30 seconds. If there is no further action, it
will automatically turn back to normal mode after 30 seconds switching LED off.

Press TV Power key one more time. LED blinks one time and then LED will be “ON”.

Press 1st SOURCE KEY (Power key of the original key)

If it learns correctly, --- LED will be “ON”after blinking Two Times .
- If it does not learn correctly, --- LED will be “ON” after blinking 5 Times
- If there is no input Signal for 30 seconds, the remote will stay in learning mode after
blinking 5 times.
- If no further input signal for another 30 seconds, the remote will return to normal operation
mode. LED will be OFF.
- If you want to teach it again, then you need to press TV Power key. --- LED will stay
“ON”after blinking one time.

Now you learned one code from your original TV power key. Please press TV Power key
one more time. --- LED will stay ON after blinking one time.
=> If the first TV Power code is learned correctly (after LED Blinking two times), 2nd code
can be taught.

Please press 2nd SOURCE KEY(Any numeric key from the original remote control. For
example Number 1)

If it learns correctly, --- LED will be “ON” after blinking Two Times .
If it does not learn correctly, --- LED will be “ON” after blinking 5 Times
=> If there is no input Signal for 30 seconds, the remote will stay in learning mode after
blinking 5 times.
If no further input signal for another 30 seconds, the remote will return to normal operation
mode. LED will be OFF.
=> If you want to teach it again, then you need to press TV Power key. --- LED will stay
“ON” after blinking one time.

If you press [TV Power + OK] Keys at the same time, it turns back to normal operation
mode after LED blinking 3 times.
2. Low Battery Warning Function
It is the fuction to check if the battery has LOW VOLTAGE

If you press [STB Power] KEY at the level that IC’s OPERATING VOLTAGE is as low as
“2.2V ~ 2.3V”, power code will be produced blinking LED 3 times.

At that LOW VOLTAGE level, you can not go into LEARNING MODE.
Remote Control Unit