NOTE: This page is intended for builders who have completed the steps marked D-180 EFIS in Section 31A
Wing Electrical Interconnect Update, Page 31A-08. If Section 31A was completed with the intent of updating
your system directly to SkyView (Page 31A-08 steps marked SV-D1000 EFIS) then ignore the steps on this
page.
Step 1: Remove the WH-B268 (WHT) Lighting Power Jumper Wire and corresponding ES-00079 Floating
Connector Pin 16-20 AWG from the left side ES-00077 Floating 8 Pos Connector Female position 6 as shown in
Figure 2. See Figure 1 for reference on the overall fuselage configuration.
Cut off the floating connector and cover the end of the wire in heat shrink.
Step 2: Remove the WH-B268 (WHT) Lighting Power Jumper Wire and corresponding ES-00079 Floating
Connector Pin 16-20 AWG from the right side ES-00078 Floating 8 Pos Connector Male position 6 as shown in
Figure 3.
Cut off the floating connector and cover the end of the wire in heat shrink.
Step 3: Find the WH-L439 (YEL/RED) Nav Power Wire coming from the WH-00026 RV-12 Option Conversion
Harness previously routed through the F-1203A Bulkhead.
The nav power wire splits near the F-1203A Bulkhead into the shorter WH-L456 (YEL/RED) wire and longer
WH-L458 (YEL/RED) wire. The split in the wire needs to be located between the F-1202F Bulkhead and the
F-1203A Bulkhead.
Route the longer wire to the right side F-00032 Fuselage Side Cover opening through the snap bushings in the
F-1215-L & -R Seat Ribs. See Page 31-09, Figure 1.
Route the shorter wire to the left side opening.
Crimp a ES-00079 Floating Connector Pin 16-20 AWG on the end of each wire then insert them into position 6 on
the floating 8 position connectors.
POSITIVE WIRES
WH-L72 (YEL/RED)
GROUND SCREW
ON SEAT RIB
ES-00079
WH-P274 (WHT)
(LIGHTING KIT)
WH-B268 (WHT)
(LIGHTING KIT)
ES-320562
FIGURE 1: NOISE FILTER
DETAIL - D180 EFIS
WH-B184 (WHT)
WH-P274 (WHT)
ES-320562
GROUND WIRE
ES-00103
WH-B268 (WHT)
(LIGHTING KIT)
ES-00079
ES-00078
UP
ES-00077
B
2
6
8
1
8
3
W
H
T
FIGURE 3: RIGHT FUSELAGE
CONNECTOR MALE
BACK VIEW
D-180 CONFIGURATION
FIGURE 2: LEFT FUSELAGE
CONNECTOR FEMALE
BACK VIEW
D-180 CONFIGURATION
2
7
1
0
0
B
R
N
/Y
E
L
W
H
T
2
2
1
8
F
5
7
B
1
8
3
5
7
1
0
7
3
W
H
T
W
H
T
Y
E
L
B
2
6
8
1
8
1
8
B
7
4
0
2
0
L
7
3
Y
E
L
/B
L
U
1
0
7
2
0
L
8
8
5
7
3
3
P
2
7
4
B
7
4
0
1
8
1
8
B
2
6
8
1
8
W
H
T
W
H
T
W
H
T
UP
B
1
8
3
5
3
1
8
W
H
T
42D-23
0
10/03/11
REVISION:
RV-12
DATE:
PAGE
REVISION:
DATE:
VAN'S AIRCRAFT, INC.
