TIE-WRAP PITOT
AND STATIC
TOGETHER
FIGURE 1: REINSTALLING
THE STATIC TEE
Step 1: Cut a length of PT 1/8 CLR PLASTIC 24 inches long to make the
F-00012 Static Line Port - Tee.
Step 2: Cut a length of PT 1/8 CLR PLASTIC 7/16 inches long to make
the F-00014 Static Line Tee Upsize.
Step 3: Cut a length of PT 1/4 OD TUBE 15 inches long to make the
F-00013 Static Line Tee - ADAHRS.
Step 4: Cut a length of PT 1/4 OD TUBE 33 inches long to make the
F-00015 Pitot Line Extension.
Step 5: Heat then slide the F-00014 Static Line Tee Upsize and F-00013
Static Line Tee - ADAHRS over the forward facing leg of the F PLASTIC
TEE as shown in the detail view in Figure 1.
Heat then slide the F-00012 Static Line Port - Tee onto the left leg of the
F PLASTIC TEE.
Heat then slide the Static Line onto the right leg of the F PLASTIC TEE.
Step 6: Heat a PT 1/4IDX3/8ODX4" Pitot Tube Joiner. Use the pitot tube
joiner to join the F-00015 Pitot Line Extension and Aft Pitot Tube
together. See the detail view in Figure 1.
RIGHT SIDE
STATIC PORT
AFT
PITOT
LINE
STATIC
LINE
F-00012
PITOT LINE
LEFT SIDE
STATIC
PORT
PT 1/4IDX3/8ODX4"
(SHOWN TRANSPARENT)
AFT
PITOT
LINE
F-00015
F PLASTIC TEE
F-00012
F-00015
F-00013
F-00014
STATIC LINE
F-00013
42D-13
0
10/03/11
REVISION:
RV-12
DATE:
PAGE
REVISION:
DATE:
VAN'S AIRCRAFT, INC.
