Vanner SP00175, Руководство пользователя

Страница: 9 / 32

INCORPORATED
®
Installation
ITC-Series Inverter Page 9
Owner’s Manual 8/5/17
Equalize button access
Through Access hole.
Overload Overload
Low Battery Bulk
Fault Fault
INCORPORATED
Inverter
On/Off
Charger
On/Off
On/Off Switch for Inverter
On/Off Switch for Charger
Serial Communications
Connection
Configuration Switches
for Programming
Configuration Switches Access
Configuration Switches
Note: Power Must be
Cycled to read a new
DIP Switch value
F 3 Figure 1.4-2 ITC Control/Display Unit
F 4 Figure 1.4-3 ITC Control/Display Unit Component Identification
ITEM DESCRIPTION
1 Inverter Indicator
Light Solid when on, flashes when enabled but not on
2 Inverter On/Off
Button Enables/Disables Inverter Function
3 Charger Indicator
Light Solid when on, flashes when enabled but not on
4 Charger On/Off
Button Enables/Disables Charger Function
5 Overload Light Indicates if Inverter Overloaded
6 Low Battery/Bulk
Light Dual Purpose
– Indicates Low Battery in Inverter Mode – In charger mode, if on indicates that
Charger is in Bulk Mode and if in Equalize, this light flashes.
7 Fault Light Dual Purpose
– Indicates that a fault has occurred in the inverter or Charger – Could be a Over
Temperature shutdown, Low/High Battery Shutdown, Power Stage Fault.
8 Equalize Button
Access This is used to enable the equalization cycle on the battery during charging.
Overload Overload
Low Battery Bulk
Fault Fault
INCORPORATED
Inverter
On/Off
Charger
On/Off
1
2
3
4
5
6
7
8