background image

PURE BREEZE FUME HOOD

120V

25799 Jefferson Ave.

  

  

Murrieta, CA 92562

 

  

1-800-VANIMAN (826-4626)

  

  

www.vaniman.com

  

 

 

[email protected]

10370-11/21 PAGE 6

Page 6

d. 

The 

HEPA Filter

 (fourth filter) is the large aluminum framed filter on the right side of the motor 

compartment. It captures 99.97% of particles and organisms down to 0.3 micron. This filter should 

last six to twelve months before replacement.

Replacing the HEPA filter

: Pull the HEPA filter out of the unit by pulling on the handle provided 

and discard filer appropriately. Remove any packaging material from the new HEPA Filter, and 

orientate it so that the pull handle and and label are facing you. Align the frame of the filter with 

the outer walls of the unit and slide into place. 

Order P/N 97024.

  

i.  Circuit Breaker

 - If the unit has an internal electrical problem or has been overloaded by 

a power surge, the Circuit Breaker may need to be reset.  It is located on the top of the 

unit by the main power switch and power socket. To reset the circuit breaker, flip the On/

Off switch into the Off position, unplug the power cord from the unit, correct the problem 

then push the breaker reset button until it clicks.

2.  Thermal Protection 

– The motor in the unit is protected against overheating. Overheating will be 

caused by inadequate airflow or through the unit, so make sure to check the filters and change if 

necessary. If the unit should turn off during operation due to overheating, it may need to cool down 

for an hour or two before the thermal protection will reset. Check the circuit breaker first as described 

in #2 above. 

REPLACEMENT PARTS

The following items are offered to enhance the usage of your quality Vaniman Unit. These items can 

be ordered through your supplier using the following part numbers. Please feel free to contact Vaniman 

Manufacturing Co. with questions regarding our products.

Description

Part Number

Tabletop Stand

10516

Tabletop Stand Window

10517

Pre-Filter

97021

Secondary Filter

97022

Pre-Filter & Secondary Filter Kit

97025

Charcoal Odor Filter

97023

HEPA Filter

97024

Circuit Breaker, 5A

3436

Power Supply

1422

Selector Switch Knob

1471

Remote Switch

VMC-A450

Remote Switch 6ft Extension Cable 10505
Eye Bolts

3191

Wall Mount Bracket Screws

3195

Содержание VMC-A450








Отзывы: