background image

2

104025

CONTENTS

SECTION

PAGE

Safety Information ................................................................................... 2

Product Identification .............................................................................. 4

Local Codes ............................................................................................. 4

Product Features ...................................................................................... 4

Air for Combustion and Ventilation ........................................................ 5

Installing .................................................................................................. 8

Check Gas Type ............................................................................... 8

Clearances to Combustibles (Vent-Free Operation Only) ............... 8

Stove Cavity Assembly .................................................................... 9

Installing Gas Log Heater Into Stove ............................................... 13

Connecting to Gas Supply ................................................................ 15

Checking Gas Connections .............................................................. 17

Operating Heater ..................................................................................... 19

Inspecting Burners ................................................................................... 21

Cleaning and Maintenance ...................................................................... 22

Troubleshooting ....................................................................................... 22

Technical Service .................................................................................... 26

Specifications .......................................................................................... 26

Service Hints ........................................................................................... 26

Replacement Parts ................................................................................... 26

Accessory ................................................................................................ 27

Illustrated Parts Lists ............................................................................... 28-31

Warranty Information .............................................................................. Back Cover

SAFETY

INFORMATION

WARNING ICON

G 001

 WARNINGS

IMPORTANT: Read this owner’s manual carefully and completely before
trying to assemble, operate, or service this heater. Improper use of this
heater can cause serious injury or death from burns, fire, explosion,
electrical shock, and carbon monoxide poisoning.

WARNING ICON

G 001

 DANGER

Carbon monoxide poisoning may lead to death!

Carbon Monoxide Poisoning:

 Early signs of carbon monoxide poisoning resemble

the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not
be working properly. Get fresh air at once! Have heater serviced. Some people are more
affected by carbon monoxide than others. These include pregnant women, people with
heart or lung disease or anemia, those under the influence of alcohol, and those at high
altitudes.

Propane Gas

: Propane gas is odorless. An odor-making agent is added to the gas. The

odor helps you detect a gas leak. However, the odor added to the gas can fade. Gas may be
present even though no odor exists.

Make certain you read and understand all Warnings. Keep this manual for reference. It is
your guide to safe and proper operation of this heater.

Safety Information continues on next page

Содержание Amity SCIVFB

































Отзывы: