Vanguard Amity SCIVFB Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 32

background image

WARNING: If the information in this
manual is not followed exactly, a fire or
explosion may result causing property
damage, personal injury, or loss of life.

— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.
• Do not touch any electrical switch; do

not use any phone in your building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the
gas supplier’s instructions.

• If you cannot reach your gas sup-

plier, call the fire department.

— Installation and service must be per-

formed by a qualified installer, service
agency, or the gas supplier.

WARNING: Improper installation, adjust-
ment, alteration, service, or maintenance
can cause injury or property damage.
Refer to this manual for correct installa-
tion and operational procedures. For
assistance or additional information con-
sult a qualified installer, service agency,
or the gas supplier.

WARNING: This is an unvented gas-
fired heater. It uses air (oxygen) from
the room in which it is installed. Provi-
sions for adequate combustion and ven-
tilation air must be provided. Refer to
Air for Combustion and Ventilation sec-
tion in this manual.

®

Patent Pending

AMITY



Stove Model Chassis With SVYD18P Variable Manually-Controlled Gas

Log Heater (Burner System For Amity Stove).

SCIVFC - Charcoal
SCIVFB - Azure Blue
SCIVFG - Hunter Green
SCIVFR - Burgundy Red

Save this manual for future reference.

AMITY



(VENT-FREE)

PROPANE/LP GAS STOVE HEATER

®

OWNER’S OPERATION AND INSTALLATION MANUAL

This appliance may be installed in an aftermarket* manufactured (mobile) home, where not prohibited by state or
local codes. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not

convertible for use with other gases.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

WARNING: The SVYD18P
vent-free gas log heater is
only approved for use in the
Amity



SCIVF(*) series

stove models.

(* Indicates Color Suffix Designation)

1
2
3
...
»

Содержание Amity SCIVFB

































Отзывы:

Нет отзывов

Похожие инструкции для Amity SCIVFB

Бренд: HAMPTON BAY Страницы: 32

Бренд: RAIS Страницы: 52

Бренд: Vermont Castings Страницы: 9

Бренд: Vermont Castings Страницы: 28

Бренд: HASE Страницы: 116

Бренд: Heat-N-Glo Страницы: 26

Parkray ASPECT 80B

Бренд: Hunterstoves Group Страницы: 28

DI Lusso Eco R4 Cube

Бренд: Hunter Stoves Страницы: 32

Бренд: Kuma Stoves Страницы: 12

Бренд: Kuma Stoves Страницы: 30

Бренд: Kuma Stoves Страницы: 30

Бренд: Cadel Страницы: 33

Thermofan 631 T

Бренд: Defy Страницы: 16

Donna Air 80 US

Бренд: Royal Страницы: 18

Бренд: Royal Страницы: 62

Бренд: Palazzetti Страницы: 164

Бренд: Harbor Freight Tools Страницы: 5

ULTIMATE U39-LP

Бренд: Regency Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды