VanGaa Lighting SWIFT 121, Руководство по эксплуатации

Страница: 5 / 17

power in one interconnected daisy chain

When the voltage is 220V , Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain

Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.

Always ground (earth) the fixture electrically.

Avoiding hit the Light when you are move or install the light.

The minimum distance between light-output and the illuminated surface must be more
than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at
least 0.2 meters away from the fixture.

Do not expose the fixture to rain or moisture.

Avoid looking directly into the light source (especially those who suffer from epileptic
fits)

Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures
higher than this.

The Maximum surface temperature is 50°C

When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.

Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅳ
POWER CONNECTION
I
NSTALLING A
N
ENUTRIK
C
ONNECTOR ON A
P
OWER
C
ABLE

Put bushing and chuck onto the cable.

Prepare cable as shown above. The power cable must is a three-conductor 2.5mm
2
cable.

Insert the wire into the terminals and fasten the clamping device by a flat screw driver.

Push insert and chuck into housing (pay attention to the guiding keyway).

Fasten bushing.
-03-