RS−P Solar Water Pump Controller User Manual
Chapter 2 Use and installation of PS-P Solar water pump controller
19
Step 6. Connect solar pump controller and solar pump
There are four wires inside the AC cable from pump and
pumpcontroller, the colors of the wires below will be probably
different in actual on site condition, examples below is just
for the reference.
Connect PE wire of pump and PE cable of pump controller;
→
Connect V wire of pump and V cable of pump controller;
→
Connect W wire of pump and W cable of pump controller;
→
Connect U wire of pump and U cable of pump controller.
Step 7.
Re-check wiring connection of solar pump system. If everything is ready (correct wiring, enough
output power of PV arrays, and etc.), then switch ON DC breaker and AC breaker (if available). And the
system runs and user can see operating data on LCD screen after 1 minute.
3-phase AC pump
Controller terminal
