Vanderbilt
6
A6V10200077_e
Installation Instructions
08.02.2016
A key module with an indicator module form the basis of the system. The remote testing system can include up
to 7 indicator modules.
Minimum
Maximum
1x GMYA7-A
1x GMYA7-S
1x GMYA7-S
7x GMYA7-A
3.1
Application
The remote testing system is designed for testing permanently connected seismic detectors for indoor use in
stationary operations only. Correct function cannot be guaranteed for applications exceeding the limits (see Sec-
tion 10 Technical data).
3.2
Requirements for safe use
The appropriate seismic detectors GM775 have a VdS-compliant test input and must be equipped with a test
generator GMXS1. The remote testing system must be installed correctly and tested successfully after initial
commissioning.
The remote testing system must be connected to a source of voltage with a limited rating in accordance with
EN60950-1.
4
Scope of supply
Basic module GMYA7-AS
Indicator module GMYA7-A (optional)
1 x Key module with 2 keys
1 x Indicator module
1 x Mounting aid (8 parts)
1 x Connection cable with 10 way terminal block
1 x 10 way terminal block
6 x Screws 4 x 30mm
4 x Screws 2.5 x 8mm
6 x Dowels Ø 6 x 30mm
2 x Jumpers
4 x Blanks
2 x Inscription templates
1 x Operating manual
1 x Indicator module
1 x Mounting aid (8 parts)
1 x Connection cable
with 10 way terminal block
3 x Screws 4 x 30mm
2 x Screws 2.5 x 8mm
3 x Dowels Ø 6 x 30mm
2 x Blanks
2 x Inscription templates
1 x Operating manual
