background image

www.vanco1.com

800.626.6445

3

INTRODUCTION

The Evolution by Vanco EVWP2006RX HDMI Wall Plate Receiver over Single Cat5e/6 with Bi-directional IR, auto EDID/
EQ, and POE receieves high definition video and audio signals, IR, and power at a distance of up to 164ft/50m over a single 
Cat5e/6 cable.  Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Receiver to be 
powered without the use of a power supply.  No EDID or EQ adjustments are necessary as the units automatically adjusts 
for compatibility and gain. This receiver fits easily into a single gang low-voltage box for easy and flexible installations. This 
product fully supports DTS-HD and Dolby TrueHD audio formats, and is HDCP compliant.  In addition, bi-directional IR pass-
through allows for source or display control.  For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power 
over Ethernet, the EVWP2006RX is a great solution. 

FEATURES

HDMI® POE Wall Plate Receiver over Single Cat5e/Cat6 Cable 

Part # EVWP2006RX

• 

To be utilized with Evolution by Vanco matrix units, splitters, and extender transmitters that send HDMI 
signals over a single Cat5e/6 cable and feature Power over Ethernet (PoE) Technology

• 

Transmits HDMI video, audio, control and power through single CAT5e/6 cable

• 

Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the 
transmitter or receiver to be powered off of a single power supply

• 

Fits easily into a single gang low-voltage box and allows for power to be supplied on either the 
transmitter or receiver for a flexible installation

• 

Transmission Range: 164ft/50meters at resolutions 1080p @ 60Hz and 262ft/80 meters at 1080i 
through single Cat5e/Cat6 cable

• 

Features Auto EDID and EQ Management for plug and play installation

• 

Supports bi-directional IR 20-60KHz (RX->TX and TX->RX)

• 

Supports audio formats, Dolby True HD, DTS-master, etc.

• 

Supports all 3D Formats

• 

Supports EDID call back

• 

Supports CEC pass through

• 

VESA DDC and hot swap technology 

• 

HDCP Compliant

• 

Compatible with DVI 1.0

• 

Allows cascading to create a larger distribution system

Содержание EVWP2006RX













Отзывы: