background image

Snapshot 

Ok on Dimmer 

 

Outdoor OK 

 

Sound Activated 

 

DMX512 

Master/Slave 

 

115V/230V Switch 

 

Replaceable Fuse 

User Serviceable 

Duty Cycle 

 

 

 

 

 

DMX-DFI User Manual 

 

 

 

 

 

 

CHAUVET, 3000 N 29

th

 Ct, Hollywood, FL 33020 U.S.A.  

(800) 762-1084 – (954) 929-1115 

FAX (954) 929-5560 

www.chauvetlighting.com 

 

 

1.

 

B

EFORE 

Y

OU 

B

EGIN

 

Unpacking Instructions 

Immediately upon receiving a product, carefully unpack the carton, check the contents to ensure that 

all parts are present, and have been received in good condition. Notify the shipper immediately and 

retain packing material for inspection if any parts appear damaged from shipping or the carton itself 

shows signs of mishandling. 

Save the carton and all packing materials

. In the event that a fixture 

must be returned to the factory, it is important that the fixture be returned in the original factory box 

and packing. 

Note:

  

If you should require sending any items back to CHAUVET, call CHAUVET for a Return Authorization  
(RA) number. The factory will not allow any shipments without an RA#.  

Y o u r   s h i p m e n t   i n c l u d e s   t h e   f o l l o w i n g :  

¾

 

1 x D-Fi™  

¾

 

1 x Power adapter 

¾

 Warranty 

Card 

¾

 Users 

Manual 

Important Safety Information 

Caution!

 

There are no user serviceable parts inside the unit. Do not open the housing or attempt 
any repairs yourself. In the unlikely event your unit may require service, please contact 
CHAUVET.

 

Caution! 

Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 

 
Caution! 

This unit can only be used for point-to-point operation. Point-to-multipoint systems, omni-
directional applications and multi co-located intentional radiators transmitting the same 
information are not allowed. 

Summary of Contents for DMX-DFI

Page 1: ...ory it is important that the fixture be returned in the original factory box and packing Note If you should require sending any items back to CHAUVET call CHAUVET for a Return Authorization RA number The factory will not allow any shipments without an RA Your shipment includes the following 1 x D Fi 1 x Power adapter Warranty Card Users Manual Important Safety Information Caution There are no user...

Page 2: ...r requirements for a particular unit see the label affixed to the back plate of the unit or refer to the unit s specifications sheet All devices must be powered directly off a switched circuit and cannot be run off a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel is used solely for a 0 to 100 switch Before applying power to a fixture check that the source volta...

Page 3: ... Receiving signal from transmitter Red Solid Error Turn the unit off then back on Error Turn the unit off then back on T R Red Blinking Transmitter on Unit is incorrectly set to transmitter Green Frequency 2 selected Frequency 2 selected F1 F2 Red Frequency 1 selected Frequency 1 selected Note The receiver will output a standard DMX signal even if it is not receiving DMX data wirelessly from the t...

Page 4: ...responsibility to notify and submit claims with the shipper in the event that a fixture is damaged due to shipping Any other claim for items such as missing component part damage not related to shipping and concealed damage must be made within seven 7 days of receiving merchandise Technical Specifications WEIGHT DIMENSIONS Length 6 5 in 165 mm Width 3 5 in 89 mm Height 1 5 in 38 mm Weight 0 8 lbs ...

Reviews: