www.vanco1.com
800.626.6445
9
PC CONTROLLER USER GUIDE
CONTINUED
EDID control page
1. Select the needed EDID to input port and click
set button the EDID will write to the selected HDMI
input ports.
Matrix page
1. LED which display Input number for respective
Output
2. Click to select Input port for respective Output
port
3. Click to select previous or next Input port for
respective Output port
4. Click to select the seamless switching output
mode
5. Click to select the seamless switching time
6. Click to automatically adjust the output picture
7. Click to scaler the output picture
8. Click to select the input signal source
Note: The signal source for the VGA input 6 can use.
FW upgrade page
1. Click to open FW file(file extension is “.fw”)
2. Display the FW file path
3. Displaying the progress of the software upgrade
4. Click to upgrade the Matrix software
5. Display the message of the software upgrade
6. Clear the message of the software upgrade
Note: The matrix after software upgrade required
again to power supply.
