www.vanco1.com
800.626.6445
6
CONNECTION DIAGRAM
CONNECT AND OPERATE
1. Connect your sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver,
etc. to either the HDMI, VGA or Composite inputs on the unit. Insert and extract cables carefully with
the power switched off. Connecting and disconnecting while the unit is powered can result in damage to
circuitry.
2. Connect the HDMI outputs that go to the displays
3. OPTIONAL: Connect the IR receiving extender to the IR EXT port on the matrix. You may also connect
the provided IR RX and IR TX cables if you wish to use IR routing. See below for additional detailed
information.
4. OPTIONAL: Connect an Ethernet cable from the TCP/IP port on the matrix to a local Area Network.
5. OPTIONAL: Connect an RS-232 cable from the RS232 port on the matrix.
6. Connect the DC 12V Locking power supply to the power receptacle on the matrix.
7. Connect the power supply to an available electrical outlet and power on the device.
NOTICE
1. Vanco High Speed HDMI cables are strongly recommended for use with this product to ensure best results.
2. Incorrect placement of IR Blaster and Receiver may result in the failure of the unit. Please check carefully
before plugging in the IR accessories into the respective IR sockets.
