background image

www.vanco1.com

800.626.6445

11

LIMITED WARRANTY

With the exceptions noted in the next paragraph, Vanco warrants to the original purchaser 

that the equipment it manufactures or sells will be free from defects in materials and 

workmanship for a period of two years from the date of purchase. Should this product, in 

Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair 

or replace this product without charge. Any defective parts replaced become the property 

of Vanco. This warranty does not apply to those products which have been damaged due to 

accident, unauthorized alterations, improper repair, modifications, inadequate maintenance 

and care, or use in any manner for which the product was not originally intended. 
Items integrated into Vanco products that are made by other manufacturers, notably 

computer hard drives and liquid crystal display panels, are limited to the term of the 

warranty offered by the respective manufacturers. Such specific warranties are available 

upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible 

power supply must be installed in the electrical circuit to protect against power surges. 
If repairs are needed during the warranty period the purchaser will be required to provide 

a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this 

equipment. The seller will then contact Vanco regarding warranty repair or replacement.

TECHNICAL SUPPORT

In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445.  

You can also email technical support issues to [email protected]  

When calling, please have the Model Number, Serial Number (affixed to the bottom of the 

unit) and Invoice available for reference during the call. 
Please read this Instruction Manual prior to calling or installing this unit, since it will 

familiarize you with the capabilities of this product and its proper installation. 
All active electronic products are 100% inspected and tested to insure highest product 

quality and trouble-free installation and operation. The testing process utilizes the types of 

high-definition sources and displays typically installed for entertainment and home theater 

applications. 

LIABILITY STATEMENT 

Every effort has been made to ensure that this product is free of defects. The manufacturer 

of this product cannot be held liable for the use of this hardware or any direct or indirect 

consequential damages arising from its use. It is the responsibility of the user and 

installer of the hardware to check that it is suitable for their requirements and that it is 

installed correctly. All rights are reserved. No parts of this manual may be reproduced 

or transmitted by any form or means electronic or mechanical, including photocopying, 

recording or by any information storage or retrieval system without the written consent of 

the publisher.  

Manufacturer reserves the right to revise any of its hardware and software following its 

policy to modify and/or improve its products where necessary or desirable. This statement 

does not affect the legal rights of the user in any way. 

Содержание EVEX2004













Отзывы: