Vanco D2.1, Руководство пользователя

Страница: 8 / 20

8
D2.1 IR Remote
Push the buttons...stuff happens...
1. POWER - Toggle power button. Press once to turn
the D2.1 ON. Press again to turn the D2.1 OFF.
2. EQ FLAT - Press to cancel active EQ and return all
EQ settings to neutral (flat).
3. VOLUME UP/DOWN- Press ‘+’ to increase volume.
(Turn it up.) Press ‘-’ to decrease volume. (Turn it
down.)
4. NIGHT MODE- Press once to turn Night Mode ON
(Night Mode maintains relative dynamics of audio
content at low listening levels.) Press again to turn
Night Mode OFF.
VOL SUB
IN
1
IN
2
IN
3
EQ2 EQ1
EQ4 EQ3
EQ
Flat
1
2
3
4
5
6
7
8
9
10
11
5. MUTE - Toggle mute. Press once to mute speakers. Press again to un-mute speakers.
6. EQUALIZER 1-4 - Select EQ 1-4. These settings are identical to the EQ1-4 settings in the
Taylor App. EQ 1-3 are factory presets, EQ 4 is configurable with the Taylor App.
7. SUB UP/DOWN - Press ‘+’ to increase D2.1 Sub Out level. Press ‘-’ to decrease D2.1 Sub
Out level.
8. BLUETOOTH PLAY/PAUSE - Toggle Play/Pause when controlling a Bluetooth device
paired to a Beale Street Audio DBT-Taylor Module connected to the D2.1 RJ45 Receiver IN
jack. Press once to Pause. Press again to Play.
9. BLUETOOTH SKIP FORWARD/BACK- Press I
◄
to skip to the previous track when
controlling a Bluetooth device paired to a Beale Street Audio DBT-Taylor Module
connected to the D2.1 RJ45 Receiver IN jack. Press
►
I to skip to the next track.
10. BLUETOOTH SCAN FORWARD/REVERSE - Press
◄◄
to reverse scan to the current track
when controlling a Bluetooth device paired to a Beale Street Audio DBT-Taylor Module
connected to the D2.1 RJ45 Receiver IN jack. Press
►►
to forward scan the current track.
11. INPUT SELECT - IN 1 - Press to select the source connected to the D2.1 L&R Line Level
IN.
IN 2 - Press to select the source connected to the D2.1 Optical IN.
IN 3 - Press to select the Beale Street Audio DBT-Taylor Module
connected to the Receiver IN.