Vanco D2.1, Руководство пользователя

Страница: 7 / 20

7
6. OPTICAL IN - S/PDIF Optical Terminal (Toslink). Digital audio sensing input. The D2.1
can be configured to turn ON when an audio signal is present on this input. (See section:
Operation/ON/OFF.) The amp will turn OFF when no audio input has been sensed for
fifteen minutes. Using a Toslink cable, connect to the Optical output of a TV or other device
to be played through the D2.1.
7. RECEIVER IN - RJ45 Connector. Allows connection of the Beale Street Audio DBT-Taylor
Programming Module for D2.1 setup via the Taylor App (Android & iOS) and DBT-Taylor
Module. Also allows Bluetooth Audio Streaming with IR control of a compatible Android
or iOS tablet using the D2.1 IR Remote or other properly programmed IR System Remote.
The D2.1 can be configured to turn ON when an audio signal is present on this input. (See
section: Operation/ON/OFF.) The amp will turn OFF when no audio input has been sensed
for fifteen minutes. Using Cat5/5e/6 cable, connect to the RJ45 Receiver OUT jack on the
Beale Street Audio DBT-Taylor Programming Module.
8. STATUS - LED flashes or illuminates solid to indicate various setup modes.
Solid ON - Power ON.
OFF - Power OFF or Standby depending upon setup.
See IR Learning Section for other Status LED modes.
9. USB - Provides 5VDC to Beale Street Audio Accessories.
D2.1 Side Vents
Even though the D2.1 will typically run cool, the side vents allow air to circulate through the
chassis allowing optimum performance, and besides...they just look cool...get it...air vents...
look cool...never mind...
One serious item...please be sure to not block the vents with wires or other objects that will
block the free flow of air through the amp.
D2.1
Shelf
IMPORTANT! DO NOT BLOCK VENTS!
D2.1 Inputs & Outputs