Vanco D2.1, Руководство пользователя

Страница: 15 / 20

15
MUTE
1. Press the Mute button on the D2.1 IR Remote. The Status LED will flash once and turn
OFF.
2. Press the button on the system remote to be used for Mute.
3. The Status LED should flash twice and turn OFF.
4. Press the button on the system remote again. The Status LED will flash once and turn ON
to confirm the learned code.
5. To exit Learning Mode, press IN 1, otherwise press the next button to be learned.
INPUT 3 SELECT
1. Press the IN 3 button on the D2.1 IR Remote. The Status LED will flash once and turn OFF.
2. Press the button on the system remote to be used for IN 3.
3. The Status LED should flash twice and turn OFF.
4. Press the button on the system remote again. The Status LED will flash once and turn ON
to confirm the learned code.
5. To exit Learning Mode, press IN 1, otherwise press the next button to be learned.
TO EXIT LEARNING MODE
1. Press the IN 1 button on the D2.1 IR Remote to exit learning mode. The Status LED will
turn OFF.
TO CLEAR ALL LEARNED COMMANDS
First Enter Learn Mode:
1. Press the Power button on the D2.1 IR Remote to turn D2.1 power OFF.
2. Sequentially press the Mute, IN 3 and Volume Down (-) buttons to enter the learning
mode.
3. Status LED will turn ON.
In Learn Mode:
4. Press the IN 2 button on the D2.1 IR Remote to clear all learned commands. The Status
LED will flash once.
To Exit Learn Mode:
5. Press the IN 1 button on the D2.1 IR Remote to exit learning mode. The Status LED will
turn OFF.
Factory Reset
RESET TO FACTORY DEFAULT SETTINGS
1. Sequentially press the
buttons to restore the D2.1 to factory default settings.
The Status LED will turn ON then OFF.
NOTE: It is not necessary to be in Learn Mode to reset factory default settings.
IR Learning