INSTRUCTION
VIEW / EDIT MAPS
7
The FP3 allows access to all of the ECU’s tables for adjustments, as well as map
optimization features to improve your riding experience.
NOTE:
Vance & Hines does not recommend adjusting ECU tables if you are not
familiar with tuning. Engine damage can result from improper settings.
EDITING MAPS
1. Go to ‘View/Edit Maps’
2. Press the map you want to edit
3. Select the table you want to edit
4. Select a single cell to change, or change several cells at once by long pressing
a cell, then long pressing an adjacent cell to highlight all cells in between
5. You can manually type in a value, or use the calculator to add, subtract,
multiply, or divide to achieve your desired results.
Example: To increase cells by 10%, highlight appropriate cells and multiply (*) by 1.1.
6. Once desired changes have been made, press the flash button
(lightning bolt) and follow the on screen prompts.
RESET TABLE TO ORIGINAL SETTINGS
CHANGE TABLE CATEGORY
FLASH MAP
MORE INFORMATION ABOUT TABLE
HIGHLIGHT TWO ADJACENT
CELLS TO CREATE A BLOCK OF
CELLS TO EDIT
USE FUNCTIONS TO EDIT CELLS.
HERE, 10% IS BEING ADDED
TO CELL AREA BY MULTIPLYING
BY 1.1
