manualshive.com logo in svg

Vance and hines Fuelpak FP3, Руководство пользователя

Поделиться
Скачать
Vance and hines Fuelpak FP3 Скачать руководство пользователя страница 13

1.  After initializing Autotune, ride the bike for 20-60 minutes

2.  Upon completion, turn off your motor and connect to the FP3 app

3.  Go to your Autotune table and press ‘Apply Values’, then press ‘Apply’ and follow 

on screen prompts to fl ash.

4.  Repeat steps 1-3 for a second session of 20-60 minutes

5.  Repeat steps 1-2 for a third session of 20-60 minutes

6.  After completing your third session, turn off your motor and connect to the FP3 app

7.  Go to your Autotune table and press ‘Apply Values’, then press ‘Finish’ and follow 

on screen prompts to fl ash

RECOMMENDED AUTOTUNE PROCEDURE

There are 5 readouts available on screen. One in the center, and one in each corner.
To customize your readouts:
•  Press the readout you want to change
•  Turn the dial selector in center of screen to desired readout

•  Press center of screen to accept the readout

SENSOR DATA

NOTE:

 Readouts available depend on the year and model of the bike.

13

INSTRUCTION

AUTOTUNE / SENSOR DATA

Содержание Fuelpak FP3





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды