Vancare VERA-LIFT II B350, Руководство по обслуживанию

Страница: 15 / 65

Technical instructions Control unit Mobilette
531e2931_0101 Magnetic – The Linear Drives Company™ page 5/11
3.4 Connecting the actuator and the control device
Connecting the control device
Insert the D-SUB plug of the control device into the corresponding socket
n
on the
control unit. (Fig. 5)
The cables are strain-relieved and sealed by means of the cast cams when plugged
into the socket. The cams engage in the retaining clips.
The control device used depends on the requirements of the system manufacturer.
1
2
Fig. 5 – Connections
All cables must be secured so that no forces
act on the control unit plugs. Plugs which are
poorly aligned may become loose and dam-
age the control unit.
B
A
2 1
Fig. 4 – Inserting the battery pack
Fig. 6 – Inserting the control device plug
Ensure that the plugs are inserted with the
correct alignment, otherwise the device
socket can be damaged. Ensure the plug type
is correct (arrows must be on top)
February 2008 For your nearest Distributor, call 1-800-694-4525 15