Vancare VERA-LIFT II B350, Руководство по обслуживанию

Страница: 14 / 65

Technical instructions Control unit Mobilette
531e2931_0101 Magnetic – The Linear Drives Company™ page 4/11
3.2 Installing the control unit
Mount the control unit in the 3 holes provided on the system carrier (Fig. 2).
The MOBILETTE MCU1 can be mounted in the following positions (Fig. 3):
ƒ
Lying horizontally
ƒ
Standing horizontally
ƒ
Hanging horizontally
ƒ
Vertically (battery pack above the control unit)
The MOBILETTE MCU4 and MCU8 (protection class IPx3) may only be mounted verti-
cally with the battery pack above the control unit (Fig. 3, Pos.
f
). This prevents the
possibility of fluid entering the system.
A vertical, hanging position (
g
) with the battery pack below the control unit is not
possible, since the battery pack may fall out.
3.3 Inserting the battery pack
Insert the battery pack into the mounted control unit as described in Fig. 4.
Ensure that the cams
c
are pushed right into the guides
d
. A locking spring on the
rear of the system carrier fixes the battery pack to the control unit.
c
d
e
f g
Fig.3 – Positions MCU1
Fig.2 – Mounting the control unit
A ventilation hole is provided in the battery
pack to allow gases to escape from the bat-
tery. The ventilation hole must not be dam-
aged, removed or painted over.
Allowing liquid to penetrate the units and
blocking the ventilation is dangerous!
Ensure that the control unit is free of
mechanical tension and does not vibrate.
February 2008 For your nearest Distributor, call 1-800-694-4525 14