Vanair Reliant RS45, Инструкция по установке, эксплуатации, обслуживанию и каталог запасных частей

Страница: 15 / 88

RELIANT RS45 AIR COMPRESSOR SECTION 3: INSTALLATION
090126-OP_r0 (JAN-2018) PAGE - 7
VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
3.1 MACHINE PACKAGE
RECEIPT/INSPECTION
Upon receipt of the machine package,
inspect the exterior of the shipping crate for
signs of shipping/transit damage. Any
damage should be reported immediately to
the shipping company.
Access the roof panel to inspect the
component parts and supports. Remove
manual from inside of canopy.
Should any damage be discovered during
package inspection, contact the shipping
company immediately.
3.2 GENERAL INSTRUCTIONS
This section provides general guidance for
locating and preparing the Vanair RS45
compressor package for operation. Each
installation is unique and can be affected by
location, ventilation, and other factors such
as electrical and hydraulic power supply
availability and location.
NOTE
Before fully unpacking the unit, inspect the
component parts, supports and loose-
packed parts to ensure that there have been
no internal movements of assemblies or
components, which may have been
damaged during shipment.
WARNING
Before performing maintenance or repair
operations on the compressor, ensure that
all power has been removed and locked
out to prevent accidental application.
DO NOT assume that because the
compressor is in a STOPPED condition
that power has been removed.
WARNING
Install, operate, and maintain this
equipment in full compliance with all
applicable OSHA, other Federal, state,
local codes, standards, and regulations.
WARNING
Do not install in any enclosed space
without first contacting Vanair.
WARNING
Grounding must consist of a minimum two
(2) gauge wire between the instrument
panel, the machine, and the truck chassis.
NOTE
Although much of the information given in
this installation section is detailed, these
guidelines should be considered as
referential material only, due to the diverse
possibilities of the end user’s vehicle
make, model and year, and the unit model
specifications.
NOTE
Install electrical components (circuit
breakers, pressure switches, toggle
switches, etc.) in locations where
exposure to water or moisture will be most
minimized.
NOTE
Contact Vanair
®
at
(219) 879-5100 / (844) VAN-SERV
Service Fax: (219) 879-5335
www.vanair.com
to report missing items, incorrect part
numbers, or other discrepancies.
SECTION 3:
INSTALLATION