Van der Ende Pompen B.V.
Maasambacht 4
2676CW Maasdijk
Nederland
Installation manual Envalve series VK, VKF and PVK
Page 15 of 23
5 . Commissioning
Check whether the valve is installed correctly and the flanges or nut are secured. Check before filling the
system with fluid again the functioning (manual and automatic).
When the Envalve is set from manual to automatic (remote) operation, push against the connector shaft
until a click is heard.
It is important that the valve is in the neutral position (in the middle between open and closed) before
going from manual to automatic operation and/or before commissioning. This prevents the valve turning
beyond its limit switches and getting damaged. See also paragraph 1.3.
6. Maintenance
The Envalve is designed as maintenance free, when used in a suitable environment for intended
applications. Periodic inspection and cleaning are not essential but desirable.
Clean the Envalve with a dry cloth, do not use water on the electrical part. Do not use aggressive cleaning
chemicals.
