ValueJet VJ-628, Быстрый старт

Страница: 3 / 20

3
2 Unpacking
Install this product in a place that:
• is level
• has no vibration
• has low humidity and little dust
• has no direct sunlight or strong lighting shining on it
• has small variation in temperature and humidity
• has no drafts (including those from heating or air conditioning equipment) blowing onto it
• has low levels of electromagnetic radiation and noise
Install the product in an environment that satisfies the conditions in the table below.
Ensuring a suitable place for installation
The place should be well ventilated when you do the installation work. If it is a poorly
ventilated place, install a ventilating device.
Otherwise, the odors from the inks could impact your health.
Required installation space
Installation environment conditions
Power supply
specifications Voltage AC 90V to 132 V or 180V to 264 V
Frequency
50/60Hz ± 1Hz
Capacity No less than 10A
Environmenta
l conditions Operating
environment
Temperature 20 to 32
°
C, humidity 40 to 60%,
no condensation.
Ranges to ensure
printing precision
Temperature 22 to 30
°
C, humidity 40 to 60%,
no condensation.
Environment for
storage
• If not charged with ink when stored: up to 6 months
Temperature -20 to +60
°
C, humidity 20 to 80%.
• If charged with ink when stored: up to 1 week*
Temperature -10 to +40
°
C, humidity 20 to 80%.
*Up to 4 days if the ambient temperature is 32
°
C or higher.
Unpacking
CAUTION
Width x depth: 1188mm x 423mm
Height (with cover open):
Without stand: 573mm
Mounted on stand: 1373mm
1388mm
1323mm
Size of printer body
Rear
Front
150mm
450mm
450mm
Size of printer body