ValueJet VJ-628, Быстрый старт

Страница: 10 / 20

10
2 Connecting the Cables
• Be sure to use a power cable of the specified type. Using any other power cable could
result in electric shock or fire.
• Do not use a damaged power cable. It could cause electric shock or fire.
1.
Before connecting the cables
• Close the front cover.
• Turn the media fixing knob to set the fixing
mechanism.
• Make sure that the waste fluid tube clamp is
fastened.
2.
Connecting the power cable
[1] Make sure that the power switch is turned off.
Note
• If the power switch is in a pressed-inward state, it is turned on
and you must press it again to turn it off.
[2]
Set the voltage selector switch to the voltage of the
region where you are using the product.
• For AC 100V to 120V, set the voltage selector switch
to 115V.
• For AC 200V to 240V, set the voltage selector switch
to 230V.
Important!
• The voltage selector switch is set to 230V as a factory setting.
• If the voltage selector switch is not set to match the regional voltage, errors will occur.
[3] Connect the power cable to the product.
Connecting the Cables
WARNING
Check!
100-120V
200-240V