ValueJet VJ-628, Быстрый старт

Страница: 16 / 20

Safety Instructions VJ-628 Quick Start-up Guide
16
Concerning electric shock, short circuits and fire (continued)
Pay attention to the following points when
handling the power cord set.
• Do not tamper with the power cord set.
• Do not put heavy objects on the power cord
set.
• Do not bend, twist or pull the power cord
set by force.
• Do not route the power cord set near
heating appliances.
Never open covers attached using screws
under any circumstances.
This may cause an electric shock or a
malfunction.
Before installing the dedicated stand, be
sure to turn off the printer’s power and
remove the power plug from the outlet.
Otherwise there will be danger of electric shock.
• Pay attention to the following points when
handling the power plug.
Any mishandling of the power cable could
cause a fire.
• Make sure that no foreign substances such
as dust are stuck to the power plug.
• Make sure that the power plug is firmly
inserted to the edge of the power socket.
When you do not use the printer for a long
period, make sure to pull out the power plug
from the power socket for
safety.
Make sure to connect an earth wire to the
earth connection that meets the following
standards.
• Earth terminal of power socket
• An earth wire with a copper plate which is
buried at 650 mm or more in the ground.
Make sure that no moisture enters the printer.
It could cause shorting of the electrical circuits.
Installing the printer
Do not install the printer on a surface:
On such surfaces the printer could topple over or
fall off, potentially causing injury.
• that is shaky, or
• that is tilted, or
• that receives vibration from other
machines or equipment nearby.
Do not slant the printer, prop it against a wall
or turn it upside down.
The ink inside the printer may leak.
Moreover, normal operation after shifting (to
these positions) cannot be guaranteed.
Be sure to remove the plastic wrapping from
the product before taking it out of the
packing box.
If you leave the plastic wrapping on, your hands
could slip on it and the product could fall and be
damaged.
The operations of unpacking and moving this
product must be carried out by two or more
persons working together. The operation of mounting the printer onto
the stand must be carried out by two or more
persons working together.
When moving the printer, make sure to
maintain a horizontal position.
CAUTION
WARNING
CAUTION