Value Hobby TWEETY - 25, Инструкция по эксплуатации

Страница: 4 / 18

Included Hardware
Please note the following abbreviations used in this manual about fasteners:
1. CM means socket head screws, e.g. CM4 means 4mm socket head screws
2. PWA means self ‐ tapping screws, e.g. PWA2/PWA3 means 2 or 3mm self ‐ tapping screws
3. PM means round head machine screws, e.g. PM4 ‐ 4mm round head machine screws
4. Ф 1.8X600mm means 1.8mm diameter and 600mm length pushrod
Qty
1. Rudder pushrod [ Ф 1.8X600mm] 2
2. Elevator pushrod [ Ф 1.8X600mm] 2
3. Throttle pushrod [ Ф 1.5X300mm] 1
4. Aileron pushrod [ Ф 1.8X150mm] 2
5. Elevator joiner wire [ Ф 2X84mm] 1
6. Tail wheel assembly 1
7. Fuel tank 1
8. Wing joiner strip 1
9. Electric motor mounting plate 1
10. Wing joiner plate 1
11. Fuel tank mounting braces 1
12. Electric motor mounting block 4
13. Main wheels 2
14. Landing gear 1
15. Socket head screws for use as main wheel
shaft [CM3X35mm]
2
Qty
16. Round head machine screws (securing
wings to Fuselage) [PM3X30mm]
2
17. Round head machine screws for securing
landing gear [PM3X20mm]
2
18. Pushrod EZ ‐ connector for throttle servo
[ Ф 2.1mm]
1
19. Self ‐ lock Nuts for securing wheel shaft
[ Ф 3mm]
4
20. Control horn 4
21. Round head machine screws for control
horns [PM2X20mm]
12
22. Self ‐ tapping screws for securing Canopy
[PWA3X10mm]
4
23. M3 Washer 6
24. Clevises 4
25. EZ link for pushrod Z ‐ Bend 4