Step 3: Locate the composite control horn, M2x6mm bolts and matching nuts from the parts bag. You will be using
the round servo arm from your servo. Due to differences in the position of bolt opening on different servos, the
bolt opening on the control horn may not line up with the opening on your servo arm. In this case, you will need to
create proper openings on your servo arm. Install the ball-link on the pushrod. Install the composite control horn
on the servo arm. Next, you will need to assemble the pushrod with the ball-link. Use the M1.8x10mm pushrod,
M1.8 easy-connector, and M2x10mm bolt and nuts, as shown in the pictures below. After you finished assembly,
add a drop of thin CA at the bolt and nut to reduce the chance of slippage during flight.
