Step 15: Adjust the position of the cowling according to the necessary clearance of your motor. Use 4 M2x10mm
screw to secure the cowling. Then install the spinner.
Step 16: Install the wing using the wing tube, and bolt the wing to secure.
Step 17: CG Position is approximately at the wing tube location.
Control Throws:
Sport (low)
Elevator:
25 degrees up / down
Aileron:
20 degrees up / down
Rudder:
40 degrees left / right
3D
(Expo recommended, Futaba is neg-expo)
Elevator:
55 degrees up / down, 40% expo
Aileron:
45 degrees up / down, 40% expo
Rudder:
45 degrees left / right, 40% expo
