Value Hobby Sabre-X Скачать руководство пользователя страница 2

 

Dear Customer, 

 
Congratulations on your purchase of  51in Aerobatic Series: Sabre-X  from Value Hobby. We thank you for your 
generous support, and hope you enjoy your new airplane. 
 
At Value Hobby, we want to offer competitive prices, good performance, and products that you can setup and use with 
ease. That’s why we extensively researched and tested this airplane, and suggested all the products necessary for you 
to setup properly. We understand that you have many choices when purchasing, and we are grateful you choose to buy 
from us.   
 
As vendors, one of the most gratifying things for us is to hear from our customers. We would welcome any suggestion 
to help us improve. Please make us aware of any errors and imperfections in the airplane or the instructions, or about 
the setup that we suggested. We hope you’ll find our setup suggestions to be helpful, and enjoy flying your new 
airplane. Please feel free to contact us at (630) 948-0947 or email us at [email protected] 
 

Disclaimer 

 
By purchasing and/or building this model, user assumes ALL liability and risk involved with this product. This model 
should be built and flown by an experienced pilot and only flown at AMA sanctioned sites. 
 
Value Hobby guarantees this model to be free of defects in materials and workmanship at the date of purchase. This 
warranty does not cover any parts damaged by use or modifications. In no way shall Value Hobby’s liability exceed 
the original cost of the purchased model. Further, 
Value Hobby reserves the right to modify this warranty without notice. Value Hobby has no control over the final 
stages of assembly or the material used for the final assembly. No liability shall be assumed nor materials used for the 
final user-assembled product. By the act of using the final product the user accepts all resulting liability. Value Hobby, 
as a R/C product vendor, provides a top quality airplane and instructions to complete the model. The quality and flight 
characteristics of the finished model depend greatly on how it is built; we cannot guarantee the performance for the 
completed model and representations are expressed or implied as to the performance of the completed model. If the 
buyer is not prepared to accept the liability associated with the use of this product, the buyer is advised to return this 
kit immediately, in new and unused condition. 

 
Safety in Assembly

 

During assembly of this aircraft, you will be asked to use sharp knives and hobby adhesives. Please follow all safety 
procedures recommended by the manufacturers of the products you use, and always follow these important guidelines: 

ALWAYS protect your eyes when working with adhesives, knives, or tools, especially power tools. Safety glasses are 
the best way to protect your eyes. 

ALWAYS protect your body, especially your hands and fingers when using adhesives, knives, or tools, especially 
power tools. Do not cut toward exposed skin with hobby knives. Do not place hobby knives on tables or benches 
where they can roll off or be knocked off. 

ALWAYS have a first-aid kit handy when working with adhesives, knives, or tools, especially power tools. 

ALWAYS keep hobby equipment and supplies out of the reach of children. 

Safety in Flying

 

This is NOT a toy! It is a very high-performance RC airplane capable of high speeds and extreme maneuvers. It 
should only be operated by a competent pilot in a safe area with proper supervision. 

ONLY fly your aircraft in a safe, open area, away from spectators and vehicles–and where it is legal to fly. 

NEVER fly over an unsafe area, such as a road or street. 

Never fly too close to yourself or spectators. 

Never run your motor inside a house or building with the propeller attached – Remove the prop for safety. 

Содержание Sabre-X















Отзывы: