Step 8: Remove the covering over the elevator servo opening. Install the composite control horn on the servo and
the elevator. Join the elevator servo and the control horn using the M1.8x135mm pushrod.
Step 9: Removing the covering where the vertical stabilizer joins with the fuselage. Install the vertical stabilizer on
the fuselage and secure with CA. Install 3 CA hinges on the rudder. Find the tail wheel assembly from the parts
bag. You will need to bend the landing gear wire approx 4cm (1 5/8 in) from the base of the landing gear. Drill a
2mm hole on the rudder for installing the tail wheel.
