3
Insert the Z-bend wire into the pre-cut hole of the
fuselage.
Secure the Z-bend wire into the control horn. Then
secure the control horn on the pre-cut slot of the
vertical fin with CA glue.
Put the
servo plate into the fuselage. You will
need to space them to allow you to secure your
servos.
Install the
servo connector on servo arm.
Install the servo into the fuselage.
Insert the Z-bend wire into the pre-cut hole of the
fuselage. Install the Z-bend wire on the control horn.
Then Install the control horn into the pre-cut slot of
the
elevator.
