Page 4
SKU 92493
For technical questions, please call 1-800-444-3353.
8.
The supporting floor should be level, and strong enough to safely hold the weight of
the generator / welder. If the floor is not level, strong cross members should be placed
under the full length of the generator steel frame at its low side.
9.
Install sound and weather proofing only when it is not raining or snowing to avoid
trapping moisture within the generator.
Fire and Explosion Precautions
1.
Engine fuel and fumes are flammable, and potentially explosive. Use proper fuel
storage and handling procedures. Always have multiple ABC class fire extinguishers
nearby.
2.
The generator/welder room must be adequately ventilated. Exhaust fumes must be
piped to the outdoors.
3.
Keep the generator / welder, surrounding floors, and room clean at all times.
4.
When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of
fluids and cleaning materials as per any local, state, or federal codes and regulations.
Store oil rags in a covered metal container.
5.
Never store fuel or other flammable materials near the generator / welder.
6.
Do not smoke, or allow sparks, flames or other sources of ignition around the engine,
fuel tanks, or batteries. Fuel vapors are explosive.
7.
Keep grounded conductive objects, such as tools, away from exposed, live electrical
parts and connections to avoid sparking or arcing. These events could ignite fumes or
vapors.
8.
Do not refill the generator/welder fuel tank on the bed frame while the engine is
running.
9.
Do not operate the generator/welder with known leaks in the fuel system.
10.
Use only engine manufacturer recommended fuel and oil fluids.
Mechanical Precautions
1.
The generator is designed with guards for protection from moving parts. In any case,
care must still be taken to protect personnel and equipment from other mechanical
hazards when working around the generator.
2.
Do not operate the generator/welder with safety guards removed. While the generator
is running, do not attempt to reach around the safety guards for maintenance or any
other reason.
3.
Keep hands, arms, long hair, loose clothing, and jewelry away from pulleys, belts, and
other moving parts. Be aware that when engine parts are moving fast they cannot be
seen clearly.
4.
When working in and around the generator/welder always wear protective clothing
including gloves, ANSI approved safety glasses, and welding helmet with appropriate
shaded lens.
