Page 10
SKU 92493
For technical questions, please call 1-800-444-3353.
3.
Pull the plug or hot cable away from the victim using an insulated material.
4.
Stand on dry insulating material and pull the victim clear of the conductor, preferably
using insulated material such as dry wood or an insulated hook.
5.
Once the victim is free of the electric current, check for breathing. If not breathing,
perform CPR and keep the victim warm. Have someone call the paramedics.
GROUNDING
WARNING: This generator / welder must be grounded to earth ground
before using.
Improperly connecting the grounding wire (or not using one) can result in the risk of
electric shock. Check with a qualified electrician if you are in doubt as to whether the
generator is properly grounded. Do not modify tool power cords or extension cords
that will be connected to the generator. Do not remove their grounding prong. Do not
connect to the generator, or use any tool when the line cord or plug is damaged. If the
plug will not fit the outlet, have a proper plug installed by a qualified electrician.
Grounded Tools with Three Prong Plugs
1.
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If the tool
should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user, reducing the risk of electric shock. (See
Figure A.)
2.
The grounding prong in the plug is connected through the green wire inside the cord to
the grounding system in the tool. The green wire in the cord must be the only wire
connected to the tool’s grounding system and must never be attached to an electrically
“live” terminal. (See Figure A.)
3.
Your tool must be plugged into an appropriate outlet, properly installed and grounded
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (See Figure A.)
Generator / Welder Ground Terminal
Connect a # 6 AWG solid
copper wire (not included) from
the Generator / Welder ground
terminal to an earth grounding
point.
