How to use Template:
• Connect the brass extender joint (Part #4) to your shower outlet.
• Place the installation template in the desired position over the wall with the brass extender joint positioned
going through the cutout on the template. It is recommended that the tallest user in the house be the determining
factor of the desired position. 10” of clearance above the tallest user is recommended.
• Once the template is straight and in the desired position, secure the template by using tape or temporary
adhesive to hold in place.
• The template is the exact size of the shower panel. The bottom of the template should be above your existing
shower valve. Recommended that there is a ½” clearance above the valve.
• If the template does not fit within the clearance provided, you can mount the panel off center and to the side.
Installation Template Guide
PVC cover is not
required if the water
outlet is below 33.38"
Valve goes below this
template. Bottom of
panel.
• An installation template guide
is included with your shower
panel as a convenient method
of determining the correct
position of the shower panel.
M
IN ½ I
n
c
h
4
5
Installation position will
vary depending on
users height. Depending
on users height, it is
recommended to have
10” of clearance above
your head.
Recommended
10"
A
C
B
Attention:
INSTALLATION INSTRUCTIONS
- 7 -
