INSTALLER’S GUIDE
Page 14
Fig. 14 Coalflame Fascia
location
Fig. 13 Burner trim fitting
6.4
Burner Trim Fitting
Position the burner trim over the front flanges of the burner
tray and firmly push it down as far as it will go. See figure 13.
6.5
Fascia Fitting
Coalflame: The fascia has four magnetic discs which hold it
in place against the convection box front. Make sure that the
fascia is aligned correctly. See figure 14.
Limousin: Refit the fascia using the two screws previously
removed near the bottom of the fascia legs. Make sure that
the two magnetic discs at the top align with the magnet plates
near the top of the convection box. See figure 6a.
