OWNER’S GUIDE
Page 11
If for any reason the coal pieces require cleaning,
proceed as follows: -
3.2.4
Remove the case front and window as
described above.
3.2.5
Carefully lift the coal pieces out of the
firebox and place them on a piece of cardboard or
similar.
3.2.6
Carefully clean the upper and lower surfaces
of the coals with a soft brush or vacuum using a
soft brush attachment.
3.2.7
Replace the coal pieces as described below.
3.3 Replacing the coal pieces
3.3.1
Place the fuel bed (embossed 'A'
underneath) in position. The front edge of the fuel
bed locates under the flange of the locating strip at
the base of the firebox. See figure 5.
Figure 5. Fuel Bed “A”
Location
