INSTALLER’S GUIDE
Page 31
centre of the fire to clear the right side of the surround.
Slide the surround unit sideways, if necessary, to align
the bottom fixing holes with those in the convection
box. Fix the bottom of the surround unit to the
convection box with two screws (See figure 31).
11.2.3
“Icon “ Surround
Place the front surround against the fireplace front
surface so that the two retaining plates at the back of
the surround are directly above the two upper retaining
brackets at the top of the convection box. Lower the
surround unit making sure that the ears on the
surround retaining plates locate fully over the sides
of the convection box brackets. (See figure 32).
Swing the bottom control linking bar towards the
centre of the fire to clear the right side of the
surround. Fix the bottom of the surround unit to the
convection box with two screws (See figure 33).
11.3
All Surrounds
Align the hole near the bottom of the control
linking bar with that in the control pivot bracket.
Join them with the knurled shouldered screw (See
figure 34). Make sure that the isolating valve is
closed. Slide the control button fully from top to
bottom and back to make sure that the slide and
pivot mechanisms move smoothly. Note that some
resistance should be felt when the slide button
reaches the “burner fully on” position.
Figure 34. Control Bar & Pivot
Bracket (Shown with “Adorn”)
Figure 33 “Icon” Front Surround
Bottom Location
Figure 32. “Icon” Front
Surround Top Location
Figure 31. “Visage” Front
Surround Bottom Location