Valor 855 Dimension, Инструкция для установщика и владельца

Страница: 9 / 24

Q Do you want to fit the heater against a flat wall with the base of the heater
on a hearth or similar surface?
A You will need to purchase an optional spacer frame kit - See section 4 . This
spacer enables the heater to be flat wall fixed. The depth of the spacer frame is
75mm.
Q What opening size do you need in the surround or fireplace opening?
A This heater can be fitted into fireplaces or surrounds where the following
dimensions are available.
Width 395mm - 450 mm
Height 555mm - 590 mm
Depth At least 70mm
Q Do you want to fit the heater below a shelf, mantle or similar?
A You will have to allow the clearances as shown below:
The minimum height from the base of the heater to the underside of any shelf made
from wood or other combustible materials is detailed below.
•
For a shelf up to 150mm deep : Minimum height = 700mm.
• For a shelf deeper than 150mm : 700mm + 12.5mm for every 25mm depth over
150mm (See Figure 5).
INSTALLER AND OWNER GUIDE
Page 9
©
GDC Group Ltd. 2011
Figure 5. Combustible shelf clearances