Valor 855 Dimension, Инструкция для установщика и владельца

Страница: 15 / 24

9. LIGHT SHUTTER ADJUSTMENT
The light shutter is an adjustable plate that increases and
decreases the appearance of the flames in the flame effect.
1.
Switch on the fuel effect. If you are satisfied with the
appearance of the flame effect there is no need to adjust the
light shutter.
2.
To gain access to the light shutter, unscrew and remove the
thumbscrew from the bottom of the filter panel. Gently pull the
base of the filter panel forward and down to remove it from the
heater (See figure 14). There is a black card baffle in front of
the light shutter; hold both sides and gently pull this forward to
gain access to the light shutter (See figure 15).
3.
To adjust the light shutter, loosen the two screws then lift the
shutter to increase the appearance of the flames or lower it to
decrease the appearance of the flames (See
figure 16).
4.
When you have obtained the required flame
appearance, tighten the two screws and secure
the shutter in place, replace the card baffle and
filter panel.
INSTALLER AND OWNER GUIDE
Page 15
©
GDC Group Ltd. 2011
Figure 16.
Figure 15.
Figure 14.