6
Figure 9
Figure 6
Figure 7
Figure 8
Figure 10
(Shown with Elegant
Front)
Assembly of Fronts
Icon & Adorn Fronts
Remove the tape securing the control linkage to the front.
Do Not Lift The Front Surround By The Control Knob
All Models
Carefully lift the front surround. Hook the front surround onto the retaining plates
on the heater body and lower the front surround down – See figure 6.
All Model 801 Versions
Check that the switch control spindle is in the OFF position and the slider is in the
OFF position. Swing the control linkage/boss towards the control spindle on the
heater and
push the boss onto the spindle, ensuring the “D” flats are in alignment – See figure 7
Final Assembly
All Models
With the two screws provided, fix the front surround to the heater body – See figure
8
Check the controls to make sure they operate smoothly.
Icon Model
Fix the lower cover to the front surround corner brackets using the two knurled screws provided – See figure 9.
Model 801 Visage, Elegant and Ultimate Fireside and all Model 802 versions
Place the front casting/fuel support in position by passing the screw heads/hooks through the keyhole slots in the surround
and lowering down – See figure 10.
