Valor 785ILN Скачать руководство пользователя

Страница: 2 / 38

We recommend that our gas

hearth products be installed

and serviced by professionals

who are certified in the United

States by NFI (National Fireplace

Institute

Thank You ...

For purchasing a Valor by Miles Industries. Your new radiant gas heater is a technical

appliance that must be installed by a qualified dealer. Each Valor fireplace is fully

tested during the production process for your safety and comfort.

Your unit has been professionally installed by:

Dealer Name _______________________________________

Phone Number ______________________________________

Should you encounter an operational problem, call your dealer immediately.

Do not try to repair the unit as you may cause an injury or damage the fireplace

The information contained in this installation manual is believed to be correct at

the time of printing. Miles Industries Ltd. reserves the right to change or modify any

information or specifications without notice. Miles Industries Ltd. grants no warranty,

implied or stated, for the installation or maintenance of your heater, and assumes no

responsibility for any consequential damage(s).

Designed and Manufactured by / for

Miles Industries Ltd.

190–2255 Dollarton Highway, North Vancouver, BC, CANADA V7H 3B1

Tel. 604-984-3496 Fax 604-984-0246

www.valorfireplaces.com

© Copyright Miles Industries Ltd., 2010

Do not put

furniture or other objects

in this space in front of

the fireplace:

36” (0.9 m)

Fireplace

Hearth

Содержание 785ILN







































Результаты поиска

Содержание 785ILN

Отзывы:

Похожие инструкции для 785ILN

Бренды по названию

Популярные бренды

Valor 785ILN, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 785ILN

Отзывы:

Похожие инструкции для 785ILN

Бренды по названию

Популярные бренды