17
5.2.6.
Corner location, rear vent
connection, vertical rise,
horizontal termination
(Figs 24 & 26)
Can be used with either #551DVK standard
vent kit or #984 Dura-vent terminal cap and
accessories.
Adapter #817VAK, two 90° vent elbows
#990B and Dura-vent pipe lengths will be
required.
(See venting options section of this manual).
No more than two 90°elbows must be used.
All vertical dimensional limits are as section
5.2.3.
The minimum corner location is shown in
fig. 26.
5.2.7.
Rear vent connection, vertical
vent rise with through the roof termination
(Fig.27)
Adapter #817VAK, one 90° vent elbow #990B, Dura-vent pipe
lengths, a vertical vent terminal and roof flashing will be required.
Various other ceiling or roof items may be necessary depending on
the particular installation (See venting options section of this
manual).
5.2.8.
Rear vent connection, vertical vent rise with offset
and through the roof termination (Fig.28)
For situations where offset is necessary in an attic to avoid
obstructions or allow useful space.
Adapter #817VAK, one 90° vent elbow#990B, two 45° vent
elbows #984, wall straps, a vertical vent terminal, roof flashing
and Dura-vent pipe lengths will be required. Various other
ceiling or roof items may be necessary depending on the
particular installation (See venting options section of this
manual).
Figure 26
Figure 27
Figure 28
