Valor 474 Valentia, Инструкция по установке и эксплуатации

Страница: 8 / 37

2. ACCESSORY LIST
Note that in England and Wales the Building Regulations require a terminal guard to
be fitted if the terminal is less than 2m (6ft 6in) from the level of any ground, balcony,
flat roof or place to which any person has access and which adjoins the wall in which
the outlet is situated. A suitable guard assembly is available. Part No. 994371.
In Scotland, although the Building Standards (Scotland) do not require a terminal
guard to be fitted, the fitting of a guard as detailed above is recommended.
- Combustible wall kit, Part no. 994530 is available as an optional extra.
Four telescopic flues are available:
- Min Flue (Telescopic) for walls from 150mm to 203mm No. 990177
- Short flue for walls from 75mm to 203mm No. 993241
- Medium flue for walls from 200mm to 356mm No. 993240
- Long flue for walls from 356mm to 510mm No. 993239
NOTE: The fire is supplied with Medium flue only. Short & Long flues are optional extras.
3. APPLIANCE DATA AND EFFICIENCY
3.1 General information.
The appliance information label is at the left side of the rear case and is visible after
removing the fascia. In addition, for customers reference, there is a label giving the
appliance serial number on the outside of the fascia at the bottom right side.
Page 8
©
GDC Group Ltd. 2014
INSTALLER GUIDE
Gas Natural (G20)
Inlet Pressure 20mbar (8in w.g.)
Input - Max. (Gross) 4.5kW
Input - Min. (Gross) 1.5kW
Pressure Setting (Cold) 17.5 +/- 1.0mbar
Height to Centre Line of Flue 351mm
Burner Injector Upper Cat. 77/180
Burner Injector Lower Cat. 77/160
Main Burner: Aerated Duplex
Ignition: Battery spark generator
Flame Control: Part No. 987623
Spark Gap: 3 to 4mm
Pilot Unit: SIT 0150060, SIT No.34